2009 Arctic Cat 150 ATV Service Manual, Page 37Get this manual
7Measure the thickness of the centrifugal clutch shoe liningThe minimum service limit for the lining is 2.0 mmNOTE: If any shoe lining is below the service limit, the complete set must be replaced Assembling 1Place the fixed face of the driven pulley on the pulley compressor baseNOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed
4Install the spring seat over the hub and movable face hub
2Apply multi-purpose grease to the O-rings and grease seals on the movable face; then install on the fixed face making sure the alignment marks are properly aligned