2008 Arctic Cat ThunderCat ATV Service Manual, Page 154Get this manual
Footrests REMOVING 1Remove the machine screws and flange nuts securing the front and rear fenders to the footwells
7Install the instrument pod and ignition switch; then secure with two reinstallable rivets and the ignition switch retaining ring8Set the storage compartment box into position; then install the storage compartment cover making sure the mounting lugs engage the slotsSlide rearward to secure and lock by engaging the lid lock9Install the steering post cover and secure with the reinstallable rivets; then install and secure the radiator access panelCD691A
2Remove the screws securing the foot pegs to the footrests; then remove the foot pegs and footwells3Remove the cap screws and flange nuts securing the footrests to the frame; then remove the footrestsCLEANING AND INSPECTING