2008 Arctic Cat ThunderCat ATV Service Manual, Page 149Get this manual
NOTE: When measuring and adjusting, there should be normal operating load on the ATV (without an operator but with Arctic Cat approved accessories) 4Measure the distance from the outside edge of each handlebar grip to equal reference points on each
7Secure the brake caliper to the knuckle with the patch-lock screwsTighten to 20 ft-lb
5Adjust the handlebar direction until the two measurements are equal; then secure the handlebar to the rear rack using tie-down strapsNOTE: Care must be taken not to allow the handlebar to turn while securing itPR264A