2008 Arctic Cat ThunderCat ATV Service Manual, Page 53Get this manual
38If removed, install the spark plugsTighten to 11 ft-lb Left-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-section
NOTE: The starter is not serviceable and must be replaced as complete assembly
NOTE: The enginetransmission does not have to be removed from the frame for this procedure
3Remove the rotorflywheel nut; then install the appropriate crankshaft protector into the crankshaft
Removing Left-Side Components
AMagneto CoverStator Coils BWater Pump CShifter Assembly DRotorFlywheelStarter Clutch ESpeed SensorTrigger Assembly 1Remove the cap screws securing the magneto cover to the crankcase; then remove the magneto coverAccount for the gasket