2008 Arctic Cat ThunderCat ATV Service Manual, Page 24Get this manual
3Pinch the V-belt together near its center and slide the spacer and movable drive face onto the driveshaftSecure the drive face with nutTighten the nut to 165 ft-lb To adjust the cable, use the following procedure1With the differential lock selector in the UNLOCK position, slide the rubber boot (A) off the adjuster; then loosen the jam nut (B)Turn the adjuster (C) to achieve 14 inof free-play measured at the end of the differential lock lever
! CAUTION
Make sure the fixed drive plate is completely seated on the clutch shaft with splines protruding prior to installing the nut or false torque and subsequent damage may occur