2008 Arctic Cat Prowler / Prowler XT/XTX ATV Service Manual, Page 153Get this manual
SteeringFrame NOTE: Critical torque specifications are located in Section 1
4Remove the cap screw securing the lower steering shaft joint to the pinion shaft; then slide the joint free of the pinion
Steering Assembly
REMOVING 1Secure the vehicle on support stand to elevate the front wheels; then remove the front wheelsPR302
! WARNING
Make sure the vehicle is solidly supported on the support stand to avoid injury
5Remove two cap screws securing the rack and pinion assembly to the frameAccount for two nuts and two washers
2Remove the cotter pins and nuts securing the tie rod ends to the knuckles; then remove the tie rod ends from the knuckles