2008 Arctic Cat Prowler / Prowler XT/XTX ATV Service Manual, Page 108Get this manual
AC VOLTAGE NOTE: The battery must be at full charge for these tests
3With the starter button depressed, the meter must show battery voltage and the starter motor should operate
Crankshaft Position Sensor 1Set the meter selector to the AC Voltage position2Connect the red tester lead to the blue wire; then connect the black tester lead to the green wire3Crank the engine over using the electric starter4The meter reading must be within specification
Starter Motor
NOTE: The starter motor is not serviceable componentIf the motor is defective, it must be replaced