2008 Arctic Cat Prowler / Prowler XT/XTX ATV Service Manual, Page 85Get this manual
7Remove four press-nuts securing the gas cap inset; then remove the gas cap and insetInstall the gas cap PR165
5Disconnect the vent hose, gasline hose, and fuel level sensor connector (XTXTX); then cap the vent fitting and gas hose fitting
8Remove the joining cap screw and nut from the rear gas tank hold-down strap; then remove the inside hold-down strapPR166E
6Remove the outer cap screw securing the front tank hold-down; then swing the hold-down to the leftPR172A