2008 Arctic Cat DVX/Utility 50 ATV Service Manual, Page 68Get this manual
9Remove the two cap screws securing the gas tank; then lift the gas tank and secure it out of the way 3Inspect gas tank cap and tank for leaks, holes, and damaged threadsINSTALLING
1Place the gas tank into position on the frame; then install the gas hoses to the fuel valve on the frame according to the tags made during removing
10Remove the gas hoses from the fuel valve noting where each one is attached
2Install and tighten the gas tank cap screws to specifications (see Section 10)NOTE: Do not over-tighten the cap screws securing the gas tank