2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 94Get this manual

2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 94

2Remove the cotter pin, castle nut, and washer; then remove the hub assembly MD2132

8Remove the cap screws and self-locking nuts securing the A-arm to the frame
3Slide brake backing plate assembly off the spindle shaft and secure it out of the way4Remove the cotter pin from the outer tie rod end; then while holding the flat on the tie rod end, remove the castle nut

9Remove the A-arm

Back to 2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual