2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 69Get this manual

2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 69

REMOVINGINSPECTING
! WARNING
Drain the gas tank prior to this procedure
1Remove the cap screw securing the valve to the frame; then pull the valve out far enough to gain access to the three gas hoses (two to the gas tank, one to the carburetor)2Remove the gas hoses from the valve by releasing the spring clamps3Inspect for and remove any obstructions in the valveINSTALLING

Fuel Valve
This ATV has valve mounted on the side of the frame separate from the gas tankThere are three positions: ON, RES, and OFF
1Install the gas hoses onto the valve with the spring clamps2Place the valve into position on the frame and secure with the cap screwTighten to specifications (see Section 10)

Back to 2008 Arctic Cat DVX 90 / 90 Utility ATV Service Manual