2008 Arctic Cat DVX 400 ATV Service Manual, Page 137Get this manual
ADJUSTING To adjust the throttle cable, see Section 2 Reverse SelectorLock
REMOVING 1Remove the reverse selector knob mounting screw; then remove the cap screw securing the lower cable housing to the reverse cable bracket2Disconnect the cable end from the reverse lock lever; then remove the cable assemblyINSTALLING 1Engage the lower cable end in the reverse lock lever; then attach the cable housing to the reverse cable bracket and tighten the cap screw securely2Route the cable along the upper right frame tube; then attach the reverse selector knob to the frame with the mounting screw and tighten securely3Replace any cable ties that were removed