2008 Arctic Cat DVX 400 ATV Service Manual, Page 127Get this manual
9Adjust the handlebar in the holders to align the punch mark (B) with the mating surface of the handlebar holdersTighten first the forward cap screws (4) to specifications; then tighten the rearward cap screws (5) to specifications ATV2200
NOTE: When installing the tie rod, the shorter end of the tie rod (1) should be directed toward the steering knucklesThe yellow surfaced nuts (2) are left-hand threadsSP418
10Install the steering head cover (6)
ATV2201
5Install the oil tank (see Section 4)6Install the radiator assembly (see Section 4)7Fill with oil and coolant; then bleed the cooling system (see Section 2)8Assemble the handlebar (1), handlebar holder (2), and steering head cover bracket (3) with the stepped end of the lower holder (A) directed rearward; then finger-tighten the cap screws