2008 Arctic Cat DVX 400 ATV Service Manual, Page 39Get this manual
17Remove the Allen-head cap screws securing the neutral switch housing (1); then remove the switchAccount for one O-ring (2) two switch contacts (3 and 4), and two springs behind the switch contacts SP171
15Holding the rotorflywheel with 27 mm offset wrench, remove the rotor nut; then remove the rotorflywheel using the magneto rotor removerSP175A
NOTE: To aid in installing, it is recommended that the assemblies be kept together and IN ORDER
Top-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment