2008 Arctic Cat DVX 400 ATV Service Manual, Page 36Get this manual
NOTE: If the right-side components are to be removed, do not remove the rotorflywheelProceed to step 7 NOTE: To aid in installing, it is recommended that the assemblies be kept together and IN ORDER
4Using 27 mm offset box-end wrench, hold the rotorflywheel; then remove the nut securing the rotorflywheel to the crankshaft
Right-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-sectionSP153
5Using an appropriate magneto rotor remover, remove the rotorflywheel assembly from the crankshaft6Remove the key (3); then remove the starter driven gear (4)