2008 Arctic Cat ATVs factory service and repair manual, Page 416Get this manual
2Place the footwells onto the footrests; then put the foot pegs in position and secure with two cap screws3Install the machine screws and flange nuts securing the front and rear fenders to the footwells Belly Panel
Footrests
REMOVING 1Remove the machine screws and flange nuts securing the front and rear fenders to the footwells
1Remove the machine screws and shoulder washers securing the belly panel to the underside of the frame; then remove the belly panel
2Place the belly panel into position on the underside of the frame; then install the machine screws and shoulder washersTighten securely
Exhaust System
REMOVING MUFFLER
1Remove the two exhaust springs at the mufflerlexhaust pipe juncture
2Remove the screws securing the foot pegs to the footrests; then remove the foot pegs and footwells3Remove the cap screws and flange nuts securing the footrests to the frame; then remove the footrests
CLEANING AND INSPECTING