2008 Arctic Cat ATVs factory service and repair manual, Page 414Get this manual
10Disconnect four headlight connectors and secure the wires out of the way; then disconnect the wires to the front accessory plug 11Rotate the handlebar to the full-left position; then lift and slide the panel to the rear and lift the rear up to clear the handlebar
9Remove the shift knob retaining pin and remove the shift knob; then remove the shift lever pivot axle nut and remove the axle and shift leverAccount for spring and two O-rings
1NOTE: It may be necessary to rotate the body panel to the right to align the opening with the handlebar