2008 Arctic Cat ATVs factory service and repair manual, Page 412Get this manual
10Connect the positive battery cable; then connect the negative battery cableTighten the battery terminal cap screws securely 11Install the battery covertool tray; then install the seatMake sure the seat locks securely
Front Body Panel Side Panels
(TRVl5001700 EFIIH1 Models)
5 Install eight cap screws and flange nuts securing the right-side footwell to the front and rear fenders; then place the left-side foot peg into position and secure with two screws and flange nutsTighten securely
REMOVING
6Place the storage compartment into position; then install the steering post coverSecure with the reinstallable rivets
1Remove the reinstallable rivets securing the radiator access cover and remove the cover; then remove four reinstallable rivets securing the steering post cover and remove the cover