2008 Arctic Cat ATVs factory service and repair manual, Page 411Get this manual
6Remove the front and rear racks; then remove the two body bolts adjacent to the air filter housing and two push nuts located behind the grille CLEANING AND INSPECTING
NOTE Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all fender components with warm soap and water
2Inspect fenders for cracks andor loose rivets3Inspect for any missing decals
INSTALLING
1Place the body assembly into position on the AWNOTE If the front and rear body panels have been separated, proceed to step 2; if the panels have not been separated, proceed to step 3