2008 Arctic Cat ATVs factory service and repair manual, Page 408Get this manual
Measuring Adjusting Toe-In 1Thoroughly wash the ATV to remove excess weight (mud, etc2Refer to the specifications and ensure the tires are properly inflated to the recommended pressureINOTE: Ensure the inflation pressure is correct in the tires or inaccurate measurements can occur
6Measure the distance from the inside of each front rim to the lower frame tube
3Place the in level position taking care not to push down or lift up on the front end; then turn the handlebar to the straight ahead positionINOTE: When measuring and adjusting, there should be normal operating load on the ATV (without an operator but with Arctic Cat approved accessories)
4Measure the distance from the outside edge of each handlebar grip to equal reference points on each