2008 Arctic Cat ATVs factory service and repair manual, Page 405Get this manual
3Inspect the tie rods for cracks or unusual bends 4Inspect all welded areas for cracks or deterioration5Inspect the steering post and steering-post brackets for cracks7bends7or wear 6Inspect the bearing halves, bearing caps7and bearing housings for cracks or wear7Inspect the handlebar tube for cracks, wear, or unusual bends8Inspect the handlebar grips for damage or wear
INSTALLING
1Place the steering post into position; then secure the lower bearing flange to the frame with two cap screwsTighten to 20 ft-lb
Install the front wheels and tighten to 40 ft-lb using crisscross patternLower the and place the handlebar and caps into position on the steering post; then position the speedometer on top of the caps and secure with the four cap screwsTighten securelyInstall the storage compartment box; then attach the storage compartment cover assembly by engaging the lugs into the slots and sliding rearwardLock the storage compartment lid to hold the assembly in place