2008 Arctic Cat ATVs factory service and repair manual, Page 391Get this manual
6Tighten the hub nut (from step 4) to 200 ft-lb; then install and spread new cotter pin making sure each side of the pin is flush to the hub nut
Brake fluid is highly corrosiveDo not spill brake fluid on any surface of the ATV and do not reuse brake fluid
3Remove the brake hose from the caliper; then remove the caliper and plug the brake fluid port
4Compress the caliper holder against the caliper and remove the outer brake pad; then remove the inner brake pad
7Install the wheel and tighten to 40 ft-lb8Remove the from the support stand