2008 Arctic Cat ATVs factory service and repair manual, Page 384Get this manual
2Pour 275 ml (9.3 fl oz) of SAE SOW-90 hypoid lubricant into the differential and install the filler plugTighten to 16 ft-lb
8Secure the tie rods with the lock nutsTighten to 30 ft-lb; then install and spread the cotter pins
3Install the front drive actuator with the three tom-head cap screws; then connect the wire connector to the main wiring harness
4Install the inner fender panels5Install the front axles (see Drive Axles in this section)6Secure the upper A-arms with cap screws and lock nutsTighten to 35 ft-lb