2008 Arctic Cat ATVs factory service and repair manual, Page 383Get this manual
5Install the pinion housingRemovingInstalling Axle Seal
INOTE: This procedure can be performed on rear gear case
INOTE: Prior to installing the seal, apply HighPerformance #2 Molybdenum Disulphide Grease to the seal outside diameter
4Using an appropriate seal installation tool, evenly press the seal into the cover bore until seated
1Remove the seal using seal removal toolMake sure the tool is free of nicks or sharp edges or the seal will be damaged
sing press, remove the bearmg CF278