2008 Arctic Cat ATVs factory service and repair manual, Page 370Get this manual
SPECIAL TOOLS
Drive System
iNOTE: Some photographs and illustrations used in this section are used for clarity purposes only and are not designed to depict actual conditionsiNOTE: Critical torque specifications are located in Section 1WNOTE: Specifications regarding the gear cases (capacities, lubricant type, etc can be found in Section of this manualRing Gear Backlash Ring Gear End Play 0.28-0.38 mm (0.011-0.015 in 0.1-0.2 mm (0.004-0.008 in
A number of special tools must be available to the technician when performing service procedures in this sectionDescription
CV Boot Clamp Tool
0444-120 0444-104
Pinion GearIShaft Removal Tool
0444-127 0444-225 0444-224
iNOTE: Special tools are available from the Arctic Cat Service Parts Department
GENERAL INFORMATION All gear cases are tagged beneath cover boltThis tag is marked with production date code, sequence code, and ratio codeAA "6" or "3.6" on the lower-right comer indicates 3.6: gear set ratio (10:36 teeth)