2008 Arctic Cat ATVs factory service and repair manual, Page 363Get this manual
Tilt Sensor (EFI Models)
Incorrect installation of the tilt sensor could cause sudden loss of engine power which could result in loss of vehicle control resulting in injury or death
4Turn the ignition switch to the ON position and read the error code on the LCDRefer to the following ECU Error Code List to id en ti the specific problem area
Do not drop the tilt sensor as shock can damage the internal mechanism
SUPPLY VOLTAGE
1Disconnect the three-wire connector from the sensor; then select DC Voltage on the multimeter and connect the red tester lead to the orange wire (C) and the black tester lead to the black wire (A)