2008 Arctic Cat ATVs factory service and repair manual, Page 333Get this manual
Oil Cooler (400)
3Install the hoses onto their respective fittings and secure with the clamps
Liquid Cooling System
(Liquid Cooled Models)
CEY I2345678910111213141516171819Oil Cooler Assy Oil Cooler Fan Nut Machine Screw Grommet Shoulder Screw Mounting Bracket Nut wNasher Bushing Mounting Bracket Washer BOV screw Clamp Hose Fitting 0-Ring Cap Screw Fitting
The coolant level should be checked periodicallyTo check the cooling system, see Section 2
Radiator
REMOVING
1Drain the coolant at the engine2Remove the front rack (see Section 8)IZ 9-
3Remove the front bumper and front fender panel (see Section 8)0741-84
4Reinove the upper and lower coolant hosesREMOVING
mNOTE: It is not necessary to drain the engine oil for this procedure
5Remove the cap screws and nuts securing the radiator to the frame6Disconnect the fan wiring from the main wiring harness; then remove the radiatorlfan assembly and account for the grommets and collars