2008 Arctic Cat ATVs factory service and repair manual, Page 332Get this manual

2008 Arctic Cat ATVs factory service and repair manual, Page 332

Oil FilterOil Pump INOTE: Whenever internal engine components wear excessively or break and whenever oil is contaminated, the oil pump should be replacedThe oil pump is not serviceable component
Testing Oil Pump Pressure
INOTE: The engine must be warmed up to the specified temperature for this testiNOTE: Some oil seepage may occur when installing the oil pressure gaugeWipe up oil residue with cloth
1Connect the Tachometer to the engine
3Start the engine and run at 3000 RPMThe oil pressure gauge must read as specified
2Connect the Oil Pressure Test Kit to the oil filter drain plug (4001500) or the oil pressure test port (700 EFIM1 Models)
400 (Manual Transmission)
0.6-1.0 kgcm2 (9-14 psi)

oil Temperature60 (140F
400 (Automatic Transmission)