2008 Arctic Cat ATVs factory service and repair manual, Page 325Get this manual
7Secure the needle jet holder with wrench; then remove the main jet8Remove the needle jet holder; then remove the needle jet, slow jet, and the starter jet9Remove the pilot screwAccount for spring, washer, and an O-ring
5Remove the float pin
10Unscrew and remove the idle adjust screwAccount for the spring and washer
CLEANING AND INSPECTING
WNOTE: Whenever part worn excessively, cracked, or damaged in any way, replacement is necessary
6Lift the float assembly from the carburetorAccount for the float valve