2008 Arctic Cat ATVs factory service and repair manual, Page 324Get this manual
5Remove the screw securing the throttle actuator cover to the carburetor; then remove the cover CHOl5D
6 Remove the throttle cable from the actuator arm
2Remove the vacuum pston assembly from the carburetor bodyAccount for spnng, sprmg seat, and the jet needle
7 Loosen the outer jam nut secunng the throttle cable to the carburetor body; then route the cable out of the way
3Remove the three screws secunng the pump housing Account for the diaphragm assembly, spnng, and U-ring (in the housing)