2008 Arctic Cat ATVs factory service and repair manual, Page 283Get this manual
Servicing ValvesValve Guideswalve Seats
If valves, valve guides, or valve seats require servicing or replacement, Arctic Cat recommends that the components be taken to qualified machine shop for servicing
A CAUTION
If any valve is discolored or pitted or if the seating surface is worn, the valve must be replacedDo not attempt to grind valve or severe engine damage may occur
3Rotate the valve in the blocks
Installing Valves 1Apply grease to the inside surface of the valve seals; then place lower spring seat and valve guide seal over each valve guide
4Maximum mnout must not exceed specificationsMeasuring Valve Stem Deflection (Wobble Method) 1Mount dial indicator and base on the surface plate; then place the cylinder head on the surface plate
2Install the valve into the cylinder head; then position the dial indicator contact point against the outside edge of the valve faceZero the indicator