2008 Arctic Cat ATVs factory service and repair manual, Page 277Get this manual
2Check and record valve tappet clearance for refer) ence when assemblin (see Section 2 TOP-sidecomponents
WNOTE: For efficiency? it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment-
3 Remove the eight cap screws securing the camshaft holders to-the cylinder head
4Install two alignment studs in the mhaust Camshaft holder; then carefidly remove the cam shaft holderAccount for two alignment pins
THIS POINT
To service any one specific componentl only limited disassembly of components may be necessaryNote the THIS POINT information in each sub-sectionT WNOTE: The engineltransmission does not have to removed from the frame for this procedure=A