2008 Arctic Cat ATVs factory service and repair manual, Page 253Get this manual
2Remove the left-side mm cap screws securing the crankcase halvesNote the location of the wiring formNote the location of the different-lengthed cap screws 24Install the coolant hose on the water pump and secure with the clampCC096D
Center Crankcase Components
INOTE: This procedure cannot be done with the engineltransmission in the frameComplete Removing procedures for Top-Side, Left-Side, and Right-Side must precede this procedureINOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
3Remove the left-side mm cap screws (two from inside the case) securing the crankcase halvesNote the location of the different-lengthed cap screws