2008 Arctic Cat ATVs factory service and repair manual, Page 241Get this manual
26Install the inside snap ring onto the hillow range shift shaft with the sharp side of the snap ring facing the engine; then place the shift lever assembly part way onto the shaftINOTE: Position the shift lever part way onto the splines and verify the subtransmission is in hi rangeIf not, shift into hi range Right-Side Components
INOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
disassembly of components may be necessaryNote the THIS POINT information in each sub-sectionT INOTE: The engineltransmission does not have to be removed from the frame for this procedureLLU'IOU
27Pull up on the hillow shift T-handle and guide the T-handle stop pin into the hi range lever stop plate slot; then slide the shift lever assembly the rest of the way onto the shift shaftSecure with the outer snap ring making sure the sharp side of the snap ring faces away from the hillow-range lever