2008 Arctic Cat ATVs factory service and repair manual, Page 240Get this manual
CCover DSpeed Sensor Housing EHiILow Shifter Assembly FRecoil Starter INOTE: Steps 1-19 in the preceding sub-section must precede this procedure
23In crisscross pattern, tighten the cap screws (from step 21) to ft-lb
20Place the gasket and left-side cover into position on the crankcaseINOTE: It may be necessary to push or pull the splined HiILow range shift shaft to establish coverlcrankcase mating
2 1Install the cap screws to secure the left-side coverDo not tighten at this timeNote the location of the long cap screw with rubber washer