2008 Arctic Cat ATVs factory service and repair manual, Page 207Get this manual
17Secure the shifl rod to the engine with new E-clip 2 1Install the side panels into position18Place the lefl-side footwell and foot peg in position on the frame; then secure with existing hardwareTighten securely19Install the front body panel with existing hardware
22Place the battery into position in the battery compartment; then install the battery cables and vent hoseSecure with the battery cover
A CAUTION
Battery acid is harmful if it contacts eyes, skin, or clothingCare must be taken whenever handling battery
20Connect the hose to the fuel pumpldelivery pipe; then connect the vacuum hose and secure with hose clamps (5001650 Hl) or connect the gasline hose connector to the he1 rail (700 EFI)