2008 Arctic Cat ATVs factory service and repair manual, Page 196Get this manual
12Place the air intake plate cushion into position; then install the air intake plateTighten the cap screws (threads treated with small amount of red Loctite #27 1) securely iNOTE: The arrows on the V-belt should point
forward
17Pinch the V-belt together near its center and slide the spacer and movable drive face onto the shaftSecure the drive face with nut (threads coated with red Loctite #271)Tighten the nut to 221 ft-lb
A CAUTION
Make sure the splines extend beyond the drive face or false torque reading and spline damage may occur