2008 Arctic Cat ATVs factory service and repair manual, Page 195Get this manual
INOTE: When installed correctly, the sides of the drive and driven gears will be flush with each other
8Install the clutch cover alignment pins into the crankcase, apply oil to the cover gasket, and install the gasket onto the crankcase
6Install the clutch shoe assembly and secure with the flange nut (threads coated with red Loctite #271)Tighten to 94 ft-lb (500) or 221 ft-lb (HI Models)
9Apply grease to the outer edges of the clutch housing; then from inside the clutch cover, install the clutch housing into the cover using rubber mallet