2008 Arctic Cat ATVs factory service and repair manual, Page 192Get this manual
1NOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed Inspecting
1Inspect the pulley faces for wear, galling, or grooving2Inspect the O-rings on the movable face for nicks, tears, or swelling
2Apply multi-purpose grease to the O-rings and grease seals on the movable face; then install on the fixed face making sure the alignment marks are properly aligned
3 Inspect grease nicks, cuts, or damage
3 Install the four pins and spacers into the fixed face hub; then pack the cam slots in the movable face greasewith m1ti:urpose