2008 Arctic Cat ATVs factory service and repair manual, Page 190Get this manual
2It is inadvisable to remove the screw securing the pump halvesIf the oil pump is damaged, it must be replaced 3Install the pilot bushing with the machined end directed down; then fit the bushing into the pulley hub
DRIVEN PULLEY ASSEMBLY
iNOTE: On the models, the driven pulley is nonserviceable componentIf the pulley faces, cam ramps, or sheeve bushing are worn or loose, the pulley must be replaced as an assemblyDo not disassemble the driven pulley on the models
Disassembling
This procedure involves relaxing compressed spring assemblyDO NOT attempt disassembling without the proper tools
4Using suitable marking pen, make alignment marks on the fixed face spring holder and both pulley faces