2008 Arctic Cat ATVs factory service and repair manual, Page 184Get this manual
4In order on the crankshaft, install washer, ring gear, key, and the magneto rotorSecure with the nut (threads coated with red Loctite #27 1)Tighten to 116 ft-lb 6Install the shift cam stopper, spring, and two washers; then coat the threads on the mounting stud with red Loctite #271 and install the nutTighten securely
5Install the shift cam plate onto the shift cam shaft; then coat the cap screw threads with red Loctite #27 and tighten securely