2008 Arctic Cat ATVs factory service and repair manual, Page 181Get this manual
5Carefully lift the reel from the case making sure the spiral spring does not accidentally disengage from the case B601D
3Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet guide from the friction plate
b must be taken when lifting the reel free of the] caseWear safety glasses to avoid injury
6Remove the protective cover from the starter handle and pull the rope out of the handle; then untie the knot in the rope and remove the handleiNOTE: Do not remove the spiral spring unless replacement is necessaryIf replacement is necessary, follow steps 7-8
4Remove the spring, collar, and friction spring; then remove the ratchet and account for the pin
7Remove the spring from the case by lifting the spring end up and outHold the remainder of the spring with thumbs and alternately release each thumb to allow the spring to gradually release from the case8Unwind the rope from the reel and remove the rope