2008 Arctic Cat ATVs factory service and repair manual, Page 153Get this manual
Installing EngineITransmission HNOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the ATV
1From the left side, place the engineltransmission into the frame; then slide the engine rearward as far as possible
2Slightly raise the rear of the engine and engage the front drive coupler into the splines of the front drive output yoke; then slide the engine forward as far as possible
5Install two engine mounting through-bolts, two bushings, and two washers; then tighten the through-bolt flange nuts to 40 ft-lb