2008 Arctic Cat ATVs factory service and repair manual, Page 143Get this manual
14Place the driven pulley assembly into position and secure with the nut (threads coated with red Loctite #271)Tighten to 80 ft-lb 17Place the V-belt into position on the driven pulley and over the front shaft
mNOTE: The arrows on the V-belt should point forward
18Making sure the eight movable drive face rollers are in position, pinch the V-belt together near its center and slide the spacer and movable drive face onto the shaftCoat the threads of the nut with red Loctite #271 and secure the movable drive faceTighten the nut to 80 ft-lb