2008 Arctic Cat ATVs factory service and repair manual, Page 142Get this manual
7Install the clutch shoe assembly on the crankshaft; then install the flange nut (left-hand thread)Tighten to 94 ft-lbmNOTE: The flat side of the flange nut should be directed towards the clutch shoe B=clutch Cover CFixed Drive Face DMovable Drive Face
=NOTE: Steps 1-10 in the preceding sub-section
must precede this proceduremust be taken when installing the flange nut; threads
11Install two alignment pins and place the clutch cover gasket into positionInstall the clutch cover
8Install the one-way clutch making sure that the green dot or the word OUTSIDE is directed away from the crankcase