2008 Arctic Cat ATVs factory service and repair manual, Page 141Get this manual
2Noting the directional arrow from removing, place the strainer cover into position on the crankcase making sure the O-ring is properly installed and secure with the four cap screws; then tighten the oil drain plug to 16 ft-lb MUlUlg
5Install the cam chainWNOTE: Keep tension on the cam chain to avoid damaging the crankcase bossMD1208
3Place two alignment pins and the oil pump into position on the crankcase and secure with the Phillips-head screws coated with blue Loctite #243Tighten to ft-lb