2008 Arctic Cat ATVs factory service and repair manual, Page 128Get this manual
Remove the shift detent camNote position of spacer for installing purposesRemove the cam stopper assemblyRemove the spacer from the driveshaft noting the direction of the stepped side for installing purposes Servicing Left-Side Components
RECOIL STARTER
Disassembling
Always wear safety glasses when servicing the recoil starter
During the disassembly procedure, continuous downward pressure must be exerted on the reel so it does not accidentally disengage and cause injury
13Remove two starter motor cap screws
1Rotate the reel counterclockwise until the notch of the reel is near the rope guide in the caseGuide the rope into the notch and slowly allow the reel to retract until all spiral spring tension is released