2008 Arctic Cat ATVs factory service and repair manual, Page 112Get this manual
12Remove the two nuts securing the right side of the cylinder to the right-side crankcase halfAccount for the washers 10Remove the cylinder head from the cylinder, remove the gasket, and account for two alignment pins
MDI 226A
13Lift the cylinder off the crankcase taking care not to allow the piston to drop against the crankcaseAccount for the gasket and two alignment pins
AT THIS POINT
To service valves and cylinder head, see Servicing Top-Side Components sub-section
c AT THIS POINTTo service cylinder, see Servicing Top-Side Components sub-section