2008 Arctic Cat ATVs factory service and repair manual, Page 108Get this manual
9Remove the clamps securing the cooling ducts to the V-belt housing 10Remove the cooling ducts from the V-belt cover
14Remove the cap screws securing the two oil fittings to the crankcase; then route the hoses away from the engineAccount for two O-rings
11Remove the cap screws securing the left-side foot peg to the footrest
iNOTE: There will be substantial amount of oil draining from the oil hoses when removingPlace drain pan beneath the hoses prior to removing the cap screws
15Remove the two cap screws securing the exhaust pipe to the engine; then remove the exhaust springs from the muffler at the juncture in front of the muffler