2008 Arctic Cat ATVs factory service and repair manual, Page 82Get this manual
HNOTE: When installing the driven plates for ease of installation, make sure they are placed onto the hub with the rounded side of the plates directed down CC239D
6Place the clutch hub assembly into the primary gear assembly
3Install the pressure plate onto the hub making sure the alignment dots are correctly positioned
The clutch hub and the pressure plate must be seated in the proper positionIf any of the incorrect positions are used, the hub and plate will have clearance
4Place the primary gear assembly wlclutch hub assembly in one hand7place the other hand on top of the clutch hub assembly, and flip the assembly over; then lift the primav gear assembly off the clutch hub assembly being careful not to disturb the drive plate notched tab orientation